ceramic disc capacitors safety, class x1/y2 400/250 v (ac) series dn emi/rfi y2-dn vishay bccomponents document number: 28518 for technical questions, contact: cdc@vishay.com www.vishay.com revision: 09-apr-10 78 obsolete - please refer to alternative vy 2 series (28535) features ? complying with ?en 132 400? and ?iec 60384-14, 2nd edition, including amendment 1.1995? ? high reliability ? kinked (preferred) or straight leads ? lead (pb)-free available applications ? across-the-line ? line by-pass ? antenna coupling design the capacitors consist of a ceramic disc both sides of which are silver-plated. connection leads are made of tinned copper having a diameter of 0.6 mm or 0.8 mm. the capacitors may be supplied with kinked or straight leads having a lead spacing of 7.5 mm (0.300") or 10 mm (0.400") and a lead length from 4 to 30 mm. the standard tolerance on capacitance is 10 % for u2m, y5p material, 20 % for z5u, y5u material and - 20/+ 80 % for y5v. encapsulation is made of flammable resistant epoxy resin in accordance with ?ul94v-0?. capacitance range: at 1 khz, 1 v (rms); 10 to 10 000 pf rated voltage u r : (x1): 400 v (ac), 50 hz (iec 60384-14.2) (y2): 250 v (ac), 50 hz (iec 60384-14.2) dielectric strength between leads: component test: 2500 v (ac), 50 hz, 2 seconds as repeated test admissible only once with: 2250 v (ac), 50 hz, 2 seconds random sampling test (destructive test): 2500 v (ac), 50 hz, 60 seconds dielectric strength of body insulation: 2500 v (ac), 50 hz, 60 seconds (destructive test) obsolete - please refer to alternative vy2 series at: www.vishay.com/doc?28535 insulation resistance at 500 v (dc): 10 000 m tolerance on capacitance: 10 %; 20 %; - 20/+ 80 % dissipation factor: at 1 khz; 1 v (rms); 2.5 % max temperature coefficients: u2m; y5p; z5u; y5u; y5v approvals: enec, ul, csa climatic category: 25/125/56 or 25/85/21 operating temperature range: - 30 to + 125 c marking marking indicates capacitance value and tolerance in accordance with ?eia 198?, voltage and approval marks. d f f d sh tangent line capacitors with 7.5 mm (0.30 " )10 mm (0.40 ") lead spacing the capacitors meet the essential requirem ents of ?eia 198?. unless st ated otherwise all electrical values apply at an ambient temperature of 25 3 c, at normal atmospheric conditions.
www.vishay.com for technical questions, contact: cdc@vishay.com document number: 28518 79 revision: 09-apr-10 emi/rfi y2-dn vishay bccomponents ceramic disc capacitors safety, class x1/y2 400/250 v (ac) series dn obsolete - please refer to al ternative vy2 series (28535) notes 1. maximum thickness 6.0 mm 2. sh = seated height 3. straight leads ar e available on request note 1. the capacitors are supplied in bulk packaging (cardboard boxes), in tape on reel or in ammopack ordering information 250 v (ac) c (pf) tol. (%) d max (mm) lead spacing f (mm) sh (2) (mm) clear text code 13 th digit: t = reel; u = ammo; 3 = bulk (3) 16 th digit: r = rohs compliant u2m 10 10 6.5 7.5 4.0 s100k25u2ms6.k7. 15 s150k25u2ms6.k7. 22 s220k25u2ms6.k7. 33 s330k25u2ms6.k7. 47 7.5 s470k29u2ms6.k7. 68 8.5 s680k33u2ms6.k7. y5p 100 10 8.5 7.5 4.0 s101k33y5ps6.k7. 150 s151k33y5ps6.k7. 220 s221k33y5ps6.k7. 330 s331k33y5ps6.k7. 470 s471k33y5ps6.k7. 680 10.0 s681k39y5ps6.k7. 1000 11.0 s102k43y5ps6.k7. z5u 1000 20 8.5 7.5 4.0 s102m33z5us6.k7. 1500 10.0 s152m39z5us6.k7. 2200 11.0 s222m43z5us6.k7. 3300 13.5 s332m53z5us6.k7. 3900 s392m53z5us6.k7. 4700 15.0 s472m59z5us63k7. 6800 17.5 10 s682m69z5us83k0. 10 000 21.5 s103m84z5us83k0. y5u 1000 20 7.5 7.5 4.0 s102m29y5us6.k7. 1500 8.5 s152m33y5us6.k7. 2200 10.0 s222m39y5us6.k7. 3300 12.0 s332m47y5us6.k7. 3900 13.5 s392m53y5us6.k7. 4700 s472m53y5us6.k7. y5v 2200 - 20/+ 80 8.5 7.5 4.0 s222z33y5vs6.k7. 4700 12.0 s472z47y5vs6.k7. 10 000 16.0 s103z63y5vs83k7. packaging d max (mm) size code packaging quantities bulk reel ammo 8.5 (0.33") 33 1000 1000 1000 10.0 (0.39") 39 11.0 (0.43") 43 12.0 (0.47") 47 13.5 (0.53") 53 500 15.0 (0.59") 59 -- 17.5 (0.69") 69 19.0 (0.75") 75 21.5 (0.84") 84 250
document number: 28518 for technical questions, contact: cdc@vishay.com www.vishay.com revision: 09-apr-10 80 emi/rfi y2-dn ceramic disc capacitors safety, class x1/y2 400/250 v (ac) series dn vishay bccomponents obsolete - please refer to alternative vy2 series (28535) notes 1. cumulative pitch error: 1 mm/20 pitches 2. obliquity maximum 3 p 2 p d p 1 d w 1 w 0 w 2 w h 0 h 1 d 0 p 0 direction of u nreeling a t detail a hh p p t 1 f e l s s kinked capacitors on tape, lead spacing 7.5 mm (0.30 " ) dimensions of tape symbol parameter dimensions (mm) nominal tolerance d body diameter 14.0 max. - d lead diameter 0.6 0.05 p pitch between capacitors 15 1.0 p 0 feed-hole pitch 15 0.3; note 1 p plane deviation 1.0 max. - p 1 feed-hole centre to lead centre 3.75 0.7; note 2 p 2 feed-hole centre to component centre 7.5 1.3; note 2 f lead spacing 7.5 + 0.6/- 0.4 h component alignment 0 1.0 w tape width 18.0 + 1.0 - 0.5 w 0 hold-down tape width 5.0 min. - w 1 hole position 9.0 + 0.75 - 0.5 w 2 hold-down tape margin 3.0 max. - h 0 height to seating plane 16.0 0.5 h 1 maximum component height 40 - e lead end protrusion 1.0 max. - l maximum length of snipped lead 11.0 - d 0 feed-hole diameter 4.0 0.2 t total tape thickness 0.9 max. ? t 1 maximum thickness of tape and wires 1.5 max. ?
www.vishay.com for technical questions, contact: cdc@vishay.com document number: 28518 81 revision: 09-apr-10 emi/rfi y2-dn vishay bccomponents ceramic disc capacitors safety, class x1/y2 400/250 v (ac) series dn obsolete - please refer to al ternative vy2 series (28535) reel and tape data in millimeters 2 8 1.5 355.6 2.0 reel with capacitors on tape 330 350 55 ammopack with capacitors on tape
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
